Rear axle was a relatively straight forward rebuild. Hubs were stripped off the axle casing ready for painting same as the front axle. Slight complication around the diff casing. A previous owner had fitted a diff guard, but also welding the guard onto the axle casing. Managed to grind off all the tack welds, bar one, which created a hole in the axle casing.
To repair this I used some chemical metal just to fill up the hole. Figured that attempting to weld the hole up was more likely to make the hole bigger.
Not got many pictures of this rebuild, but is similar to front axle. Pictures of the rebuild axle will be added later.
No comments:
Post a Comment